Introduction

To lead and be responsible for the Rotating Equipment engineering input into the design, procurement, fabrication, installation and commissioning of the offshore facilities design of BH and MM Redevelopment Projects with focus on the successful execution of the project on time, within budget and in accordance with the agreed project requirements, specifications and standards.
Accountable for the technical integrity of the engineering and design activities within the Rotating equipment discipline and for ensuring that safe, cost efficient and on-time design is developed for the project.
Be responsible for and provide direction to the technical services in the Rotating engineering elements of the project scope, with special attention to the Design Basis, EPIC scope preparation and execution, design/safety/operations reviews, procurement of Equipment, factory acceptance test, vendor selection, and timely resolution of technical and engineering issues, in coordination with Engineering Manager, other discipline Heads and relevant QatarEnergy stakeholders.
Be the project's technical expert (TA-2) in the Rotating equipment discipline and will have Technical Authority for disciplines under his organisation. Will have the authority, depending upon their level of expertise/delegated authority, to approve any deviation from DEM-1 (Shall PS). However, they need to discuss the deviation with their reporting line i.e. Department Assistant Managers in Doha for their consent before giving their approval to any deviation to DEM-1 requirements. However, if a technical deviation is beyond their authority level, then they are required to engage relevant (TA- 1), essentially department Assistant Managers, for their review and approval of deviations to DEM-1 requirements.
Responsible to provide sufficient information and technical justification to the Engineering Manager for any technical deviation for his final decision. Engineering Manager will have the delegated TA0 authority for final approval of any technical deviation.
Responsible to thoroughly investigate any proposed technical deviation and ensure that the deviation doesn’t compromise any safety in design but is helpful to optimise the design, improve the availability & operability of the facilities and will optimise project cost without impacting timely Project delivery.

What are you going to do

Ensure that risks associated with the technical deviations are as low as reasonably possible (ALARP) and properly documented.
Lead the Rotating equipment team in developing design scope and ensure that all related deliverables are in compliance with the applicable codes, standards, Project and Corporate requirements and procedures.
Coordination of all engineering related reviews including Design Reviews (ITR/PSDR/DRR etc.), ENVID, HAZID, HAZOP, SIL, Bowties, ALARP, SAFOP, SIMOPS, 3D model reviews and Constructability etc. To ensure that all the relevant documents are in place to carry out these reviews effectively and efficiently.
Coordinate and align the Rotating discipline interfaces between the project phases and direct the contractors design efforts accordingly taking into account safety, start-up, cost and constructability impacts.
Establish professional work relationships with EPIC contractor, represents QatarEnergy’s interest and direct contractors with any technical queries and interpretation of scope, specifications and standards.
Maintain an overview of the project Rotating capability and highlight to Engineering Manager any critical resourcing issues.
Participate in Project Assurance reviews and Audits and ensure findings are effectively closed out.
Provide technical guidance and prepare the Rotating engineering specific elements for the EPIC tender, procurement activities, technical bid evaluation, technical queries raised by contractors.
Participate in Technical bid evaluation and provide necessary guidance in selecting the EPIC Contractors.
Lead the selection of suitable technology, equipment, field devices, and other Rotating specific systems as per design, evaluate options and select best techno-economic solutions for project facilities.
Endorse the Rotating design calculation reports, system studies, design philosophies, software model input and output, drawings, data bases, specifications and vendor data.
Provide technical guidance during engineering stages of the project and monitor the implementation of QA/QC processes, in order to achieve deliverables and facilities that meet project requirements.
Provide guidance and support to conduct Safety and Design Reviews in coordination with other discipline Heads and Rotating Engineers.
Supervise team members and support the development of Qatari Nationals by ensuring that they receive proper job training and development.

Essential skills and knowledge

B.Sc. degree or Higher in Mechanical Engineering from a recognized university; higher degree would be advantageous.
Membership of a relevant recognized professional engineering association/institution is preferable.
A minimum of 15 years’ experience in Rotating engineering design in Oil & Gas Industry, with an Oil & Gas Company or Contractor/Consultant, of which at least 10 years should have been in offshore Oil & Gas processing projects.
Of the 15 years’ experience, a minimum of 8 years should have been a senior Rotating Engineer in a major project and a minimum of 7 years as Lead Discipline in design of major projects in a reputable engineering consultant, EPIC contractors or Oil & Gas Company.
Fully familiar with Shell DEP's and other international design codes and standards.
Fully familiar with Mechanical Engineering software’s and design review.
Familiar with all types of EPIC deliverables, equipment, design and construction progress reviews.
Proven ability to manage respective discipline engineering team in a major project environment.
Fundamental knowledge to level of "proficient" or preferably level of " mastery" in respective discipline engineering with added strength in the other disciplines to level of " developed".
Strong technical, planning, communication, reporting and leadership skills.

What we offer

Salary:

Day Rate in QAR Plus Allowance

Work Schedule:

8 Hours/ 5 Days

Duration:
- 2 years with possible extension
Location:
- Qatar

all related jobs

Process Engineering Lead

Doha, Qatar

Fulltime: 60 hrs a week

Closing: July 02, 2025

QA/QC INSPECTOR (MECHANICAL)

Ras Laffan Industrial City, Qatar

Fulltime: 40 hrs a week

Closing: June 14, 2025

Head of Commissioning

Doha, Qatar

Fulltime: 60 hrs a week

Closing: June 12, 2025

Engineering Manager

Mesaieed, Doha, Qatar

Fulltime: 54 hrs a week

Closing: June 11, 2025

Head, Mechanical Rotating Engineering