Fabrication Superintendent (Subsea)
Qatar, Doha
Fulltime: 60 hrs a week
Experience: > 10 Years
Conventional Energy
Introduction
- The Subsea fabrication superintendent is responsible to lead and manage Contractor and his local subcontractor for safe and successful fabrication of clad riser/spool, pipe coating, subsea sleepers and subsea bridges to meet the overall project objectives.
- Steward local fabrication activities ensuring HSE, Quality and timely delivery of the scope with regard to the project installation campaigns.
- Drives the contractor by providing clear guidance and facilitating resolution to issues to perform the fabrication scope.
- Project is part of a large Compression Development Program decided by LNG and its Shareholders.
- This major project consists of the delivery of new facilities (5 new riser platforms, 1 wellhead platform, 110km of CRA pipelines, stalk on risers, cables and FO lines) and 45 tieins / modifications to 30 existing platforms.
- This role requires strong leadership and technical experience to drive the Contractor and his local subcontractors to efficiently execute the fabrication scope of work.
- Directly involved with the development of clad riser / spool, subsea steel and GRP crossing structure fabrication plans and execution of the plans overseeing onshore fabrication scope responsibilities and duties safely, efficiently and effectively.
- Ensure there is quality, effectiveness and consistency in fabrication processes, systems, procedures and work products while adhering to established fabrication processes and quality procedures.
- Position to be located in Qatar at one of the local subcontractors with frequent visit to the other local fabrication yard and coating yard.
- Periodic offshore visit when required to assist the installation of the risers or subsea structures.
What are you going to do
- Ensuring adherence to all safety protocols and regulations during fabrication process.
- Manage and ensure successful fabrication and delivery of clad riser/spool, pipe coating, subsea sleepers and subsea bridges to meet the overall project objectives. (Safety, Quality, Schedule, and others, as appropriate).
- Provide technical expertise for the fabrication of the clad risers/spools, pipe coating and the subsea to support the development of the project execution schedules, scope of work, constructability methods and strategies.
- Supervise and control the activities of the Contractor/Subcontractors related to the clad risers/spool fabrication, Mechanical Completion, Pre-commissioning and Commissioning to ensure that it complies with contractual requirements, project documentation and applicable International Standards. Closely monitor the fabrication with the assistance of site inspectors (welding, NDE, coating)
- Check the constructability aspects, as well as the compliance with all technical requirements/ review of the deliverables provided by the Engineering Team Contractor.
- Contribute to the engineering for the risers and spools post metrology data, design check for the fabrication aspect, as well as the compliance to all technical requirements.
- Review technical deviations to LNG construction standards and to project specifications in close collaboration with head of Pipeline and Cable, Engineering division manager and Head of Quality.
- Provide direction and guidance on all engineering technical queries raised by either internal or external parties.
- Supervise the load out and sea fastening activities and particular attention shall be made to the risers and spools Liaise with Contractors / Subcontractors for all structure subject, MC, Precommissioning and Commissioning.
- Participate in Risk Assessments.
- Lesson Learned, kick off meetings and Pre-Job Meetings, Safety walk around TBT, technical meeting, progress meeting.
- Ensure the proper quality and traceability of the fabrication. Identify any areas of concern with respect to progress and/or quality and recommend corrective actions as required.
- Ensure with Contractors/Subcontractors that all the fabrication dossiers are well prepared and properly handed over to the Quality team and System Completion team.
- Verify that the Contractor’s reports are accurate with regards to progress reporting.
- Provide daily and weekly reports
Essential skills and knowledgeÂ
- Bachelors Degree in Sciences or Engineering
- 8 years of experience with Large Projects in Construction related disciplines (e.g., construction, installation, fabrication, execution, completion, hook-up, etc.) in the Oil & Gas Industry.
- Experience with Oil and Gas companies, contractors, service companies, or heavy construction companies.
- Knowledge of design standards, specifications, codes, and appropriate safety criteria related to major fabrication, transport, installation, brownfield execution, and hook-up, as applicable to the
- project scope.
- Knowledge of offshore facilities and structures, onshore facilities, or yard operations as applicable to a project scope.
- Knowledge of execution methods and risks associated with sour gas and LNG production facilities.
- Experience working in large scale operating organizations in Operations, Projects, Subsurface, etc.
- Experience in offshore/onshore clad riser/spool, subsea steel and GRP crossing structure fabrication activities.
- Good Knowledge in welding, NDT techniques
- Good Knowledge in MC, Pre-commissioning and commissioning
- Knowledgeable in HAZOP, HAZID, Risk Assessment processes and applications.
- Knowledge of relevant regulations, standards, and safety requirements in the fabrication industry.
- Strong understanding of clad risers/spool fabrication methods, techniques and the ability to apply them effectively to projects.
- Strong attention to detail and the ability to work under pressure in a fast-paced environment.
- A high-level of proficiency in written and spoken English.
- Computer literacy involving the regular use of professional office applications and some technical applications.
- Excellent Organization, Planning, Execution & Tracking Skills
- Excellent interpersonal and communication and interpersonal skills with a focus on teamwork and the ability to communicate and interface with different technical disciplines and people from a variety of cultural backgrounds.
What we offer
- Salary:
- Day Rate in USD Plus Allowance
- Work Schedule:
- 10 Hours / 6 Days
- Duration:
- 2028, with possible extension
- Location:
- Qatar