Piping engineers are responsible for piping design and the installation of piping systems that transport materials such as oil, gas, water, and waste. The piping setup and layout are critical to the luxuries we may take for granted, such as having running water in the house, receiving gas to warm our homes, or flushing a toilet that connects through pipes to the sewage, and later to a waste treatment plant. In short, smart piping systems are fundamental to living a comfortable life, and expert piping engineers are behind it all.

 

Piping engineers must make forecasts and analyses, decide on piping layout and placement, choose piping materials, and design piping supports or tresses, while using computer-aided design (CAD) or 3D modeling to create the blueprint and specifications. They also need to ensure that piping systems are adequately reinforced to reduce vibrations, regularly check nozzle loads in compliance with codes, draft technical reports and provide trainings to junior or fellow engineers and technicians as needed. Given the need for making many detailed calculations and high accuracy in planning, piping engineers are highly skilled in math, physics, and chemistry, among others.

 

Piping engineers and piping design engineers are needed in industries where pipes are used to transport liquid materials from one location to another. Common sectors with promising career opportunities include waste and water management, power generation, marine dredging, and the oil and gas industry.

Apply now for a job as piping engineer! 

Mechanical Verification Engineer (m/w/d)

Location: Würzburg

Branche: Life Sciences

Expertise: Planning & Testing

Experience: 2 years

Planung, Durchführung und Bewertung der Verifikation von mechanischen, elektromechanischen und elektropneumatischen Systemkomponenten Durchführung von Systemtests und Zuverlässigkeitsprüfungen Entwicklung und Koordination von Teststrategien und Testmethoden Sicherstellen der Einhaltung der Testprozesse und -standards sowie die Qualität des Testdesigns Koordination von externen Prüfungen Definieren von Anforderungen Beratung der Testteams in folgenden Themen: konformes Testvorgehen, Verifikationsplanung

Systems Engineer (w/m/d)

Location: Zipf

Branche: Medical devices

Expertise: Production & Manufacturing

Experience: 2 years

Sie führen akustische und thermische Messungen an Ultraschallsonden durch und stellen dabei höchste Qualitätsstandards sicher. Sie bestimmen Bildqualitätsparameter und nehmen Ultraschallbilder zur Analyse auf. Sie führen elektrische Messungen zur Bewertung der Sondenfunktion durch. Sie planen und koordinieren Messabläufe sowie Analysen eigenverantwortlich und arbeiten dabei eng mit anderen Fachabteilungen zusammen.

Software Engineer (m/w/d)

Branche: Communications Services

Expertise: HR & Recruiting

Experience: 3 years

Betreuung, Weiterentwicklung und Pflege von selbstentwickelten Anwendungen für Softwareentwicklungsumgebungen, beispielsweise Systeme für Einführungsmanagement, Metadatenverwaltung und Rechteverwaltung. Aktualisierung und Anpassung von Weboberflächen sowie Backend-Komponenten der oben genannten Lösungen. Erstellung von Konzepten in enger Zusammenarbeit mit den Anwendern. Abstimmung mit Produktverantwortlichen und Entwicklerteams zu inhaltlichen Konzepten, Bewertung von Anforderungen sowie eigenständige Planung und Durchführung fachlicher Tests. Austausch von Know-how innerhalb des Teams, inklusive Unterstützung durch Schulungen, Beratung und Coaching in den genannten Themenbereichen.

Project Engineer (m/w/d) für Smartphone-Integration (w/m/d)

Location: Regensburg

Branche: Automotive

Expertise: Research & Development

Experience: 2 years

Du bist verantwortlich für die vollständige Betreuung der Funktionen Apple CarPlay und Google Android Auto in Android Automotive basierten Infotainment-Systemen. Du koordinierst die Entwicklung sowohl innerhalb des Teams als auch teamübergreifend. Wichtige Themen stimmst Du mit dem Management-Kreis ab und nimmst an Projektmeetings mit Kunden teil. Du arbeitest eng mit den Teams für Connected Media und Connectivity zusammen. Auch die Durchführung von Dokumentationsprozessen gehört zu Deinen Aufgaben. Zusätzlich unterstützt Du bei der Zertifizierung durch Apple und Google.

Piping Stress Engineer

Location: Bangalore

Branche: Conventional Energy

Expertise: Planning & Testing

Experience: 5 years

Position: Piping Stress Engineer.Contract: On Permanent Role.Shall be able to perform all work of Stress engineer.Shall assign work to each stress engineer based on criticality of work and experience of stress engineer.Shall check final stress documentation before official issue.Shall issue project specific Check List, if required, for stress team and ensure its usage by Stress engineers.Shall coordinate with Mechanical group for verification of excessive loads on nozzles & furnish loads on civil information drawings in consultation with AE / LAE.Shall co-ordinate with process group for preparation of different operational cases & shall co-ordinate for any of the process data required for the analysis of the lines in consultation with AE / LAE.Shall maintain status of stress work progress every week.Shall prepare the datasheets for Expansion bellows/ Spring supports and other special support items for Procurement.Vendor drawing review of Expansion bellows/ Spring supports and other special support items.Knowledge of effect of acceleration due to various wave and wind conditions,effect of structural deflection due to module movements, fatigue analysis of pipes connected between two modules, effect of displacements due to hull deflection on piping, effect of onsite and transit to field (towing) acceleration and effect of structural deflections due to acceleration in onsite. Preparation of support and loading details for Support team. Preparation of stress Specification & critical line list and other deliverables. Stress analysis of GRE pipe lines. & cryogenic temperature piping.Stress analysis of Preparation of loading details for pipe rack, supports marking. Preparation of detailed stress analysis report for client approval. Shall able to perform stress analysis of pipe lines connected to air cooler, condenser, compressor / turbine and pumps. Shall Perform blast analysis, perform survival / damage analysis / VIV analysis and Simulate green water condition.Shall familiar with SLWR piping & hub flangesShall familiar flange leakage as per API 6AF / Peq / NC-3658.3 / ASME SEC VIIICalculation HOG and SAG displacement from HULL deflection report.

Piping Supervisor

Location: Timika

Branche: Conventional Energy

Expertise: HR & Recruiting

Experience: 5 years

Supervise and coordinate daily piping activities, including fabrication, installation, testing, and commissioning, in accordance with project specifications and industry standards. Monitor construction progress to ensure work is completed on schedule and within allocated resources. Ensure all piping systems are installed following the approved drawings, isometric diagrams, and P&ID. Enforce strict compliance with safety regulations and site-specific HSE procedures throughout all work phases. Liaise with subcontractors, engineers, and QA/QC teams to resolve technical issues and ensure work quality. Conduct inspections and ensure proper documentation of all piping works, including pressure testing and welding records. Oversee material receiving, handling, and verification to ensure alignment with bill of materials and project requirements. Provide daily progress updates and reports to the Construction Manager and Project Management Team. Train and guide junior supervisors and foremen to maintain high standards of workmanship and safety. Coordinate with other disciplines (civil, mechanical, electrical) to ensure seamless execution across project interfaces.

System Engineer Energysystems

Location: Wien

Branche: Renewable Energy

Expertise: Research & Development

Experience: 2 years

Als System Engineer sind Sie für die technische Abwicklung des Systems elektrische Anlagen verantwortlich. Sie sind erster Ansprechpartner:in für Kund:innen, Consultants, Engineers und Lieferant:innen. Detailliert erarbeiten Sie Konzepte der elektrischen Anlagenteile und verantworten die technische Abwicklung von der Auslegung bis zur Inbetriebnahme. Im Projekt behalten Sie die Termine, Qualität und Kosten im Blick und erstellen Reportings. Zudem arbeiten Sie am Risk und Claim Management aktiv mit.

Software Engineer (m/w/d)

Location: Bielefeld

Branche: Information Technology

Expertise: Planning & Testing

Experience: 2 years

Sie sind für die Analyse der Anforderungen an die Software und Erarbeitung von Lösungsvorschlägen verantwortlich Sie entwerfen und entwickeln Softwareanwendungen in verschiedenen Programmiersprachen und Entwicklungsumgebungen Sie implementieren Funktionen, Schnittstellen und Datenbanken für die Softwareanwendungen Sie sind zu dem für die Durchführung von Tests, Fehlerbehebung und Optimierung der Software zuständig Die Integration der entwickelten Software in bestehende IT-Infrastrukturen und Systeme gehört ebenfalls in Ihren Aufgabenbereich Sie erstellen technische Dokumentationen und Benutzerhandbücher Sie arbeiten eng mit dem Entwicklungsteam zusammen, um Best Practices und neue Technologien einzuführen

Cyber Security Engineer (m/w/d)

Location: Bielefeld

Branche: Information Technology

Expertise: IT & Shared Services

Experience: 2 years

Sie sind für die Beratung, Konzeption und Umsetzung von ganzheitlichen IT-Security-Konzepten mit Schwerpunkt auf Infrastruktur und dem Perimeter-Security-Bereich verantwortlich Sie analysieren Schwachstellen in vorhandenen Strukturen und Erarbeitung von Optimierungsvorschlägen Sie bearbeiten und anaylsieren sicherheitsrelevante Ereignisse Sie sind für die Integration von IT-Security-Komponenten in bestehende heterogene Infrastrukturen zuständig Sie erarbeiten Security Prozesse und Dokumentationen sowie Konzepte und Präsentationen der Lösungen

Configuration Engineer (w/m/d)

Location: Frankfurt am Main

Branche: Aerospace

Expertise: Production & Manufacturing

Experience: 2 years

Steuerung und Nachverfolgung von Produktkonfigurationen Dokumentation gemäß EN9100, ISO 9001 und AQAP 2110 Überwachung von Änderungen und deren Auswirkungen Pflege von Zusammenhängen und Referenzen in technischen Daten Erstellung englischsprachiger Reports Schulung und Betreuung des PLM-Systems Unterstützung bei Angebotserstellungen inklusive Risikobewertungen

Common piping engineer responsibilities 

  • Analyzing piping needs, designs and determining best piping layouts;
  • Preparing and designing piping system drawings, such as blueprints, maps, and diagrams, using the latest design software such as AutoCAD, CadWorx, CloudWorx, and AutoPLANT;
  • Suggesting improvements to piping design specifications and implementing piping plans accordingly;
  • Collaborating with piping designers, other engineers, and technical staff to initiate piping system ideas and provide piping engineering support during installation;
  • Providing support for purchasing and vendor submittals;
  • Performing assessments of piping quality;
  • Maintaining, undertaking repairs, and upgrading piping systems when needed;
  • Coordinating with teams to implement assignments and check status reports;
  • Achieving results in line with agreed project timelines and budgets;
  • Delivering outputs in compliance with relevant requirements, codes, and certifications, and in line with customer needs and demands;
  • Participating in technical trainings as needed;
  • Assuring the safety and security of team members.

Qualifications for piping engineer 

Piping engineers should have at least a Bachelor’s degree in Engineering, Mechanical or Chemical Engineering, Technical Design or related. In some countries, an engineering license may also be required.

Additional supporting skills and experience include:

  • At least 2 years’ experience;
  • In-depth knowledge of piping systems engineering;
  • Solid understanding of piping materials, procedures and drafting and installation techniques;
  • Some project management experience;
  • Availability to work in demanding environments;
  • Strong observation, problem-solving and analytical abilities;
  • Excellent written and verbal communication skills;
  • Well-organized and capable of prioritizing tasks well.

Read more