Introduction

  • During the onshore phase on site/yard, the Rotating Equipment Supervisor will assist the Field Operations Lead for:
    • The review of the Operational documents.
    • Comparing 3D modelling with actual construction on site.
    • Supporting equipment FATs/SATs as required.
    • The review of OTP documents.
    • Liaison between OEMs (Solar/Siemens) for installation and commissioning of major Rotating Equipment items (Gas turbines, LP/IP/HP Compressors, WAG Compressor, SWI Turbine/pump, Emergency Generator, FW pump, SW lift pumps etc).
    • Raise punches during daily work on any anomalies, deviations from model, accessibility, and operability issues.
    • The execution of the OTPs.
    • The supervision and oversight of commissioning execution (loop test, function test, performance test, etc…)
    • The preparation of the start-up procedures and the operation.
  • Offshore, in close collaboration with the Operating Authority on site (OTL) and the Commissioning Site Leader (CSL) he will:
    • Assist the production team during commissioning activities.
    • Ensure good preparation of the start-up procedures leading to the first oil.
    • Ensure that the Field Operation core crew is well aware of the procedures applicable for the new installation and the start-up sequence.
    • Ensure a role of Discipline advisor with the Major Project team to ensure the proper preparation of the start-up.
    • Review ALL punch close out (including construction), and approves all FOPS discipline related punches.

What are you going to do

  • Contributes to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.
  • Oversee and provide assurance of competence of technicians carrying out installation work on Electrical systems/equipment.
  • Contribute to HAZID, HAZOP, 3D Model reviews and Risk assessments as required throughout construction, commissioning and start-up phases.
  • Monitoring that ALL construction is as per 3D model and/or per previously raised punches in the yard.
  • Provide oversight and supervisions to ensure EPCI Contractor carries out installation works to standards acceptable to NOC and compliant with NOC standards.
  • Witness the Operational Test perform by the commissioning and liaise with the Field Operation team.
  • Identifies in conjunction with the FOPS Lead (site)/Operating Authority (OTL) offshore the procedures & precautions to be taken to assure installation, commissioning and start-up activities are carried out safely and efficiently.
  • Finalize on-site start-up procedures sharing them with the Field Operation core crew to make them applicable on site.
  • Finalize a detail start-up sequence in close collaboration with the core Field Operation crew on site.
  • Participate and assist in the preparation of the kick off meeting for start-up activities.
  • Participate to the preparation of the risk assessment of the activities to be performed during the start-up.
  • Prepare the request and order for required start-up tools. Ensure proper storage and identification of the start-up tools.
  • Prepare arrival on site (PTW, KOM, JSA…) of the vendor involved in the start-up of the facility.
  • Check any type B and C punch list and investigate on it if requested by the Field Operations lead, the OTL or the OIM.
  • Ensure the list of inhibits, overrides and isolations with the associated certificates and risk assessment are implemented according to standards, and properly signed and validated by the relevant persons.
  • Be aware of the potential Downgraded situation on site and update the core crew on any update associated with the start-up activity.
  • Participates to HAZID, JSA and Pre-Startup Safety Reviews of new facilities.
  • Prepare, update and check on site the “Red line mark-up” P&ID at the end of the construction and during commissioning phase. Ensure a set of P&ID up to date is always available for field operation team.
  • Ensures together with the OTL that Preventive Maintenance works of SECE are conducted in line with SimOps requirements in the SimOps area.
  • Reviews and follow-up the implementation of corrective actions following shutdown during start-up, communicate with vendor.
  • Make available key documents from project regarding new facilities to field operation team.
  • Ensure all operators on site understand the new safety system and process upgrades brought by the project.
  • Assists the teams for procedures for isolations/de-isolation
  • Suggests improvements and requests modifications if Operating Procedures are not satisfactory
  • Daily work planning with CSL and Pre-Comm lead to make sure all pre-comm/comm are monitored by FOPS
  • Keep OTL updated daily on the tasks ongoing on greenfield
  • Liaising daily with OTL on site to involve Base Ops team from beginning of comm phase (offshore)
  • Agree with CSL on punch categories (A/B/C) on daily basis and escalate to FOPS Lead if needed
  • Supporting Base Ops for familiarization and operation on the new facility
  • Assuring readiness for start-up of all sub-systems, plant and finally for First Oil.

Essential skills and knowledge 

  • Education: higher national diploma or certificate (equivalent to A-levels + 2 years’ study).
  • Industry experience: minimum 10 years’ experience in Control & Instrumentation in offshore operations.
  • Basic firefighting.
  • T-BOSIET, H2S training OPITO approved.
  • PTW training & JSA awareness.
  • Lifting and rigging training, manual handling training.
  • Radiation protection awareness.
  • Hazard & Energy control Logout & Tagout awareness.
  • Ability to work independently while maintaining good relations with colleagues and others.
  • Familiarity and understanding of SOLAR/Siemens Gas turbines installation, operation and maintenance.
  • Understanding of control systems relating to Gas Turbine and Compressor controls.
  • Familiarity and understanding of operations of large items of rotating equipment (pumps, compressors, diesel generators, lift pumps etc etc).
  • Detailed knowledge and understanding of ATEX certification requirements.
  • Must have a proven sense of operational responsibility, courage to intervene and challenge.
  • Previous experience with offshore operation, Production, oil & gas.
  • Willing to work flexible shifts and extended shifts as required.
  • Fluent in written and spoken English.
  • Computer literate.

What we offer

  • Salary:
    • Day Rate in USD
  • Work Schedule:
    • 28 weeks on/ 28 weeks off
  • Duration:
    • 2 years, with possible extension
  • Location:
    • Qatar