Vacancy number • PUB408436


  • Qatar
  • Closes June 24
  • 54 hours
  • Academic Bachelor

Start applying immediately

About this job

  • Industry: Oil & Gas
  • Area of expertise: Project Management & Services
  • Location: Qatar

What is required?

  • Hours per week: 54
  • Education level: Academic Bachelor


  • The purpose of the Job is to guarantee the proper preparation and execution of one MIE Project.

    As such, the job holder is accountable:

    • To ensure the proper preparation and execution of the Maintenance and Inspection Engineering (MIE) Project up to handover of MIEC deliverables to department.
    • To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering Contract (MIEC).
    • To ensure compliance of MIEC activities with the COMPANY specifications/standards and local legislation.
    • To guarantee that all the Maintainable and Inspectable equipment covered by the MIE Project are properly addressed.
    • For following-up the selection, supply chain and inspection of all Project operating spare parts and specific tools,
    • To ensure all the Project templates are uploaded for the platforms First Oil.
    • To guarantee that all the relevant spare parts are available in the warehouse for the platforms First Oil.
    • To co-ordinate Project MIEC activities in collaboration with MIE Contractor, the COMPANY Maintenance.
    • Department and Head of Maintenance and Inspection Engineering.
    • To act as interim Head of Maintenance and Inspection Engineering during his vacation and mission periods.
    • To follow-up the COMPANY method team clarifications requests on completed MIE Project.

About this role

  • HSEQ responsibilities:
    • Ensure compliance with the COMPANY Incident Free culture, Health and Safety and Environment Policy,
    • Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures, and specifications etc.),
    • Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ meetings ensuring risks are identified, actions assigned and managed within Project team and Contractors,
    • Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis),
    • Ensure that potential failures, weaknesses, and hazards are immediately reported,
  • During Basic Engineering Phases:
    • Responsible for the preparation of Scope of Work (SOW) for the MIEC contract and assist with CFT preparation along with Field Operations Maintenance Engineering Team,
    • Ensure that all Maintenance and Inspection aspects are captured in the EPCIC contract CFT,
    • Review technical bids, prepare clarifications, and facilitate clarification meetings capturing comments of Bidders,
    • Prepare answers to Bidders technical clarifications,
    • Develop evaluation matrix and critique each bidder based on technical content and proposed personnel / organization,
    • Support the cost reduction initiative with providing C&P the requirements to challenge tenders bid, reducing the cost of the Contract,
  • MIEC General Responsibilities:
    • Approve the review of all technical deliverables issued by the MIE Project Contractor,
    • Lead the review of all contractual deliverables issued by the MIE Project Contractor,
    • Manage Project weekly and monthly meetings, following progress, taking decisions, and ensuring actions are closed out without delaying the Project,
    • Validate the Project Work Time Schedule update,
    • Review the progress measurement figures established by MIE contractor,
    • Challenge Project MIE Contractor for late delivery and any potential requirement for change orders,
    • Participate in MIEC workshops with Company Stakeholders to ensure alignment,
    • Manage quarterly REX with MIE Contractor, ensuring any lessons learnt are captured in REX register for implementation into future MIECs,
    • Participate to the Project Quality Review Audits and ensured any outcomes are captured, actioned and closed out,
  • MIEC Technical Responsibilities:
    • Responsible for developing new or updating existing M&I philosophies and strategies +spare parts recommendation strategy,
    • Accountable for Project MIE activities ensuring that schedule meets EPCIC and Company milestones and readiness for start-up with emphasis being on operating and capital spare part selection process and procurement, including inspection, shipment, delivery, and storage/preservation,
    • Accountable for the quality of the technical description for all spare parts.
    • Commissioning/start up, Capital and operational ensuring purchase requisition specification and relevant certification are correct,
    • Ensure the mass loading of PM data into the CMIMS and adequacy of deliverables for spare parts (capital / operational) and consumables as require,
    • Contribute to MIE contract final report and REX at the end of the project,
    • Responsible for Project handover to Field Operations Team for Maintenance and Inspection.
  • Project Responsibilities:
    • Manage Project as directed by Head of Maintenance and Inspection Engineering,
    • Manage project start-up,
    • Provide support as required to commissioning activities,
    • Facilitate efficient communication/information flow with Head of Maintenance and Inspection Engineering, Project team, stakeholders, and the COMPANY Maintenance department,
    • Contribute to the identification of training requirements regarding installed equipment and where required contribute to the arrangement of training with vendors for COMPANY personnel,
    • Contribute to the identification of new specific maintenance contracts to be used by operations for new equipment, write SOW and prepare for Call for Tender (CFT),
    • Ad-hoc activities as required by line manager,
    • All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.


  • Bachelor’s degree or equivalent in engineering.
  • Senior Maintenance or Inspection Engineer with at least 10 years of Oil and Gas experience including Operations experience.
  • Previous experience in the supervision of Maintenance and Inspection projects and or engineering
  • activities are required.
  • Leadership skills and good communication skills,
  • Good analytical skills,
  • Ability to work on projects in a complex and multicultural environment,
  • Experience with CMIMS,
  • Familiar with COMPANY standards, MANASA and relevant codes and standards,
  • Fluent in English (listening, writing, and speaking) and its technical vocabulary,
  • Computer literate,
  • Available for missions as necessitated by project,
  • Medically fit to travel to Offshore Oil & Gas Platforms,
  • H2S OPITO and T-BOSIET training.


  • Salary:
    • Day Rate in USD Plus Allowance
  • Work Schedule:
    • 9 Hours / 6 Days
  • Duration:
    • 31-July-2026, renewable
  • Location:
    • Qatar

Brunel in the United States

A powerful global network, connecting the most talented and experienced specialists with both present-day and pioneering projects. With 120+ offices and more than 12,000 specialists around the world, we deliver skilled talent and workforce services that transform global projects in Conventional Energy, Infrastructure, Renewable Energy, Life Sciences, Future Mobility and Mining.

At Brunel, we believe that safety is not just a priority, but a value that is integral to our company culture at all levels of our organization.

  • We establish measurable objectives and targets, consistently reviewing our activities, risks, legal obligations, and performance.
  • Brunel Americas is a proud member of Houston Business Roundtable, & Utah Safety Council, and a participant of ISNetworld RAVS Plus Audit.
  • Brunel consistently utilizes performance measuring and monitoring. This includes meticulous record keeping and routine inspections.

Read more

While compensation is important, finding the right cultural fit is equally crucial. At Brunel, our longstanding cultures and values have contributed to a positive employee experience, which is why some candidates have chosen to stay with us for 30 + years.

  • Our values are at the center of everything we do –Entrepreneurship, Integrity, Results-driven, & Passion for people.
  • Brunel is committed to an inclusive workforce and we understand that Diversity, Inclusion, and Belonging are essential for a successful working culture, business, and community. Thus, Brunel takes both a global and regional approach to DE&I.

Read more

At Brunel, we prioritize candidate’s career abilities and needs even before the hiring process begins.

  • With open lines of communication and a dedicated team assigned to every contractor, we strive to make every employee experience with us as easy and seamless as possible.
  • Our contractors create and maintain lasting industry relationships that can be leveraged throughout their career.
  • We prioritize employee needs in order to build strong partnerships that support our employees’ long-term professional success and development.

Read more

Start applying immediately

image Apply now Sending an application is quick and easy. Just make sure you have the required documents ready to go.

Any questions remaining?

Your consultant, Chirag Bhatt is happy to clarify anything about this vacancy. When reaching out, use the pub number: PUB408436

Other people also looked at