Qatar, Doha
Fulltime: 45 hrs a week
Experience: > 10 Years
Education Level: Academic Bachelor
Conventional Energy
Closing: September 04, 2025

Apply Now

Introduction

  • During the onshore phase on site/yard, the C/I Supervisor will assist the Field Operations Lead for:
    • The review of the Operational documents.
    • Comparing 3D modelling with actual construction on site.
    • Supporting equipment FATs/SATs as required.
    • The review of OTP documents.
    • Raise punches during daily work on any anomalies, deviations from model, accessibility, and operability issues.
    • The execution of the OTPs.
    • The supervision and oversight of commissioning execution (loop test, function test…).
    • The preparation of the start-up procedures and the operation.
    • Supporting/supervising ATEX Inspection/examination activities for Instrumentation and Control equipment.

What are you going to do 

  • Contributes to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.
  • Contribute to HAZID, HAZOP, 3D Model reviews and Risk assessments as required throughout construction, commissioning and start-up phases.
  • Monitoring that ALL construction is as per 3D model and/or per previously raised punches in the yard.
  • Provide oversight and supervisions to ensure EPCI Contractor carries out installation works to standards acceptable to COMPANY and compliant with COMPANY standards.
  • Witness the Operational Test perform by commissioning and liaise with the Field Operation team.
  • Identifies in conjunction with the FOPS Lead (site)/Operating Authority (OTL) offshore the procedures & precautions to be taken to assure installation, commissioning and start-up activities are carried out safely and efficiently.
  • Finalize on-site start-up procedures sharing them with the Field Operation core crew to make them applicable on site.
  • Finalize a detail start-up sequence in close collaboration with the core Field Operation crew on site.
  • Participate and assist in the preparation of the kickoff meeting for start-up activities.
  • Participate to the preparation of the risk assessment of the activities to be performed during the start-up.
  • Prepare the request and order for required start-up tools. Ensure proper storage and identification of the start-up tools.
  • Prepare arrival on site (PTW, KOM, JSA…) of the vendor involved in the start-up of the facility.
  • Check any type B and C punch list and investigate it if requested by the Field Operations lead, the OTL or the OIM.
  • Ensure the list of inhibits, overrides and isolations with the associated certificates and risk assessment are implemented according to COMPANY standards, and properly signed and validated by the relevant persons.
  • Be aware of the potential Downgraded situation on site and update the core crew on any update associated with the start-up activity.
  • Participates to HAZID, JSA and Pre-Startup Safety Reviews of new facilities.
  • Prepare, update and check on site the “Red line mark-up” P&ID at the end of the construction and during commissioning phase. Ensure a set of P&ID up to date is always available for field operation team.
  • Ensures together with the OTL that Preventive Maintenance works of SECE are conducted in line with SIMOPS requirements in the SIMOPS area.
  • Reviews and follow-up the implementation of corrective actions following shutdown during start-up, communicate with vendor.
  • Make available key documents from project regarding new facilities to field operation team.
  • Ensure all operators on site understand the new safety system and process upgrades brought by the project.
  • Assists the teams for procedures for isolations/de-isolation.
  • Suggests improvements and requests modifications if Operating Procedures are not satisfactory.
  • Daily work planning with CSL and Pre-Comm lead to making sure all pre-comm/comm are monitored by FOPS.
  • Keep OTL updated daily on the tasks ongoing on greenfield.
  • Liaising daily with OTL on site to involve Base Ops team from beginning of comm phase (offshore).
  • Agree with CSL on punch categories (A/B/C) on daily basis and escalate to FOPS Lead if needed.
  • Supporting Base Ops for familiarization and operation on the new facility.
  • Assuring readiness for start-up of all sub-systems, plant and finally for First Oil.

Essential skills and knowledge 

  • Education: higher national diploma or certificate (equivalent to A-levels + 2 years’ study).
  • Industry experience: minimum 10 years’ experience in Control & Instrumentation in offshore operations.
  • Basic firefighting.
  • T-BOSIET, H2S training OPITO approved.
  • NOC PTW training & JSA awareness.
  • COMPEX certification.
  • Confined Space Entry & Rescue, Authorized Gas Tester.
  • NOC lifting and rigging training, COMPANY manual handling training.
  • Radiation protection awareness.
  • Hazard & Energy control Logout & Tagout awareness.
  • Ability to work independently while maintaining good relations with colleagues and others.
  • Must have a proven sense of operational responsibility, courage to intervene and challenge.
  • Previous experience with offshore operation, Production, oil & gas.
  • Detailed knowledge of ATEX requirements/regulations.
  • Willing to work flexible shifts and extended shifts as required.
  • Fluent in written and spoken English.
  • Computer literate.

What we offer 

  • Salary:
    • Day Rate in USD with Allowance
  • Work Schedule:
    • 8 Hours / 5 Days
  • Duration:
    • 05-Oct-2027, with possible extension
  • Location:
    • Qatar

Are you the perfect match for this vacancy? Apply in 5 minutes and let's get in touch!

Are you in perfect match ?

Anything Else?

Shape your future

Are you ready for the next step in your career? Join Brunel’s powerful global network, where passionate, results-driven specialists come together with industry-leading clients. By connecting specialists to pioneering projects, we drive change in many industries, enabling growth and delivering great outcomes. Brunel helps you reach your full potential and empowers you to make an impact within a purpose-driven global company.

Explore your career opportunities!

Our Culture and Values

At Brunel, we are proud of our unique corporate culture, which is shaped and nurtured by the collective efforts of our employees. Our work environment is characterised by an authentic, communicative and inclusive approach to teamwork that fosters an atmosphere of collaboration and creativity. Our values are at the center of everything we do – for our clients, our colleagues and ourselves.

Learn more about our global network of specialists!

Our ESG Commitment

Since 1975, our mission has always been to connect specialists to exciting career opportunities, to support the development of these careers, and to offer fair and equal employment. This has enabled us to create a truly sustainable and durable business model. Having a passion for people and caring deeply for the environment is not only part of Brunel’s DNA but is also reflected in our culture and values. As a global company, we take our social responsibility very seriously.

Join us on our mission!

Do you have any questions about this vacancy ? 

EG

Elaine Nina S Gregorio

+974 44 666 275