Introduction

  • During the onshore construction and commissioning phase on yard, the start-up MultiTech will assist Start-up supervisor for:
    • The witness of the Operational Test Procedure (OTP).
    • The execution of the OTP.
    • The execution of the commissioning (leak test, function test…).
    • Assist the start-up supervisor with preparation of the start-up procedures and the operation.
  • The Multi-Tech will accommodate with the project on the offshore temporary accommodation. He will follow the commissioning activities as seconded to the Start -up supervisor as Field Operation representative and prepare the first oil of the new wellhead platform.
  • In close collaboration with the Operating Authority on site (OTL) and the Commissioning Site Leader (CSL), he will:
    • Assists the production team during commissioning activities.
    • Assist the start-up supervisor to ensure good preparation of the start-up procedures leading to the first oil.
    • Assist the start-up supervisor to ensure that the Field Operation core crew is well aware of the procedure applicable for the new installation and the start-up sequence.
    • Anticipate the temporary configuration required and the corresponding spading plan.
    • Assist the start-up supervisor’s role as advisor with the Major project team to ensure the proper preparation of the start-up.

What are you going to do

  • Identifies in conjunction with the start-up Supervisor and Operating Authority (OTL) the procedures & precautions to be taken, to provide safe place for the intended start-up activities.
  • Assist the start-up Supervisor and Finalize on site start-up procedures sharing them with the Field Operation core crew to make them applicable on site.
  • Assist the start-up Supervisor to finalize a detail start-up sequence in close collaboration with the core field operation crew on site.
  • Participate in the preparation of the kick off meeting for start-up activities.
  • Participate to the preparation of the risk assessment of the activities to be performed during the startup.
  • Prepare as area authority the potential permit to work required for start-up activities associated with Company Only Fluid (COF).
  • Liaise with the start-up Supervisor on the main site to coordinate the progress of the start-up.
  • Contributes to updates the Start-up monitoring tools as required with the start-up Supervisor.
  • Takes part in every Permit to Work meetings related to start-up and commissioning activities.
  • Witness along with the start-up Supervisor the Operational Test performed by the commissioning and liaise with the field operation team.
  • Assist the start-up Supervisor in preparing the request and order for required start-up tools. Ensure proper storage and identification of the start-up tools.
  • Prepare the operation of first fill with the commissioning team.
  • Prepare arrival on site (PTW, KOM, JSA…) of the vendor involve in the start-up of the facility.
  • Identify and check the critical valves (especially on brown field) use a battery limit for leak test.
  • Check any type B and C punch list and investigate on it if requested by the start-up Supervisor Field Operations lead, the OTL or the OIM.
  • Ensure the list of inhibition and isolation with the associated certificates and risk assessment properly signed and validated by the relevant persons.
  • Be aware of the potential Downgraded situation on site and update the core crew on any update associated with the start-up activity.
  • Participates to HazId, JSA and Pre-Startup Safety Reviews of new facilities.
  • Prepare, update and check on site the “Red line mark-up” P&ID at the end of the construction and during commissioning phase. Ensure a set of P&ID up to date is always available for field operation team.
  • Contributes to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.
  • Assist the start-up Supervisor to ensure all operators on site are well aware on the new safety system, process upgrade bring by the project.
  • Maintains local signage and barriers adapted to the situation over time with a special attention to the boundaries of the SimOps area, the exit walkways and scaffolds.
  • Assists the teams for procedures for mechanical isolations, de-isolations and draining.
  • Suggests improvements and requests modifications if Operating Procedures are not satisfactory.
  • All staff must be willing to participate in crisis response training and to assist during emergency response situations if required.

Essential skills and knowledge 

  • Education: higher national diploma or certificate (equivalent to A-levels + 2 years’ study).
  • Industry experience: minimum 5 years’ experience in O&G production operations.
  • Basic firefighting.
  • T-BOSIET, H2S training OPITO approved.
  • PTW training & JSA awareness.
  • Confined Space Entry & Rescue, Authorized Gas Tester.
  • Lifting and rigging training, manual handling training.
  • Radiation protection awareness.
  • Hazard & Energy control Logout & Tagout awareness.
  • Previous experience with offshore operation, Production, oil & gas preferably former control room operators.

  • Multi Technician – Instruments
    • Thorough knowledge of instrumentation I measurement signal principles, safety systems (ESD/ Fire & Gas), field calibration equipment and tools such as Rosemount Hart Communicator.
    • Thorough knowledge on Ex philosophies and principles used in the petrochemical industry. Participated and passed CompEx course (Ex1-4).
    • Demonstrable evidence of attending and passing a qualification in Small Tube Boring.
    • Some Production Operator experience preferable
  • Multi Technician – Electrical
    • Thorough knowledge of HV and LV equipment -generators, motors, electrical systems and associated switch gear.
    • Good understanding how to read electrical circuit diagrams.
    • Thorough knowledge on Ex philosophies and principles used in the petrochemical industry. Participated and passed CompEx course (Ex1-4).
    • Some Production Operator experience préférable.

What we offer

  • Salary:
    • Day Rate in USD
  • Work Schedule:
    • 28 weeks on/ 28 weeks off
  • Duration:
    • 2 years, with possible extension
  • Location:
    • Qatar

Anything else ?

Shape your future

Are you ready for the next step in your career? Join Brunel’s powerful global network, where passionate, results-driven specialists come together with industry-leading clients. By connecting specialists to pioneering projects, we drive change in many industries, enabling growth and delivering great outcomes. Brunel helps you reach your full potential and empowers you to make an impact within a purpose-driven global company.

Explore your career opportunities!

Our Culture and Values

At Brunel, we are proud of our unique corporate culture, which is shaped and nurtured by the collective efforts of our employees. Our work environment is characterised by an authentic, communicative and inclusive approach to teamwork that fosters an atmosphere of collaboration and creativity. Our values are at the center of everything we do – for our clients, our colleagues and ourselves.

Learn more about our global network of specialists!

Our ESG Commitment

Since 1975, our mission has always been to connect specialists to exciting career opportunities, to support the development of these careers, and to offer fair and equal employment. This has enabled us to create a truly sustainable and durable business model. Having a passion for people and caring deeply for the environment is not only part of Brunel’s DNA but is also reflected in our culture and values. As a global company, we take our social responsibility very seriously.

Join us on our mission!

Are you the perfect match for this vacancy? Apply in 1 minute and let's get in touch!

Are you in perfect match ?