QA/QC Engineer – Welding

Job Summary

• Participate in the full procurement and manufacturing process of pipelines (line pipes, subsea casings, etc.), control welding processes at key nodes, and verify the compliance of welding technical requirements in procurement documents and manufacturing standards.
• Lead the handling of pipeline welding quality issues, coordinate with suppliers to rectify defects, and review the effectiveness of rectification documents to meet project specifications.
• Be responsible for welding technical control of procurement quality, and supervise and review the compliance of welding-related documents during the procurement phase.
• Collaborate to establish a welding quality traceability system, collect relevant records, and integrate and review them into procurement files to support quality acceptance and traceability.

Principal Responsibilities

• To become familiar with the company's requirements
• Participate in various meetings with the Vendor/Company to ensure that the vendor knows the company's quality requirements.
• Attend KOM and prepare the quality section of the KOM slide.
• Review and comment on vendor documents (ITP, MPS, FAT procedure, report, etc.)
• Communicate with the vendor/COMPANY regarding controversial comments or feedback, and raise a clarification meeting if necessary.
• Make every effort to ensure PIM is held as scheduled.
• Organize PIM meeting as host
• Verify NOI readiness and forward to TPC coordinator for vendor inspection
• Review and comment TPC inspection report
• Issue NCR if discrepancies are identified and expedite the vendor's resolution proposal / RCA (If necessary) within 3 working days of receiving NCR by vendor.
• Review the manufacturer's record book / As-built dossier.

Education/Experience Requirements

• Shall be a post-graduate degree in welding engineering or bachelor's degree in material/metallurgical engineering with lWE/ European Welding Engineer (EWE) certification.
• Shall have at least ten (10)years relevant experience in the construction of oil & gas or petrochemical industry facilities (pressure vessels. tanks, mechanical fabrication, pipelines, piping, etc.).
• Shall demonstrate sound technical knowledge and extensive experience in welding processes [Shielded Metal Arc Welding (SMAW), Submerged Arc Welding (SAW), Gas Tungsten Arc Welding (GTAW), Gas Metal Arc Welding (GMAW), Flux Cored
• Arc Welding (FCAW), etc.].materials, welding and fabrication methods in oil and gas industry.
• Expert knowledge in welding of high strength pipeline steels and improved Corrosion Resistant Alloys (CRA) used in oil and gas industry is a must.
• Shall have sound technical knowledge of corrosion / fracture / fatigue / creep/ embrittlement be haviour of welded joints and materials' chemical, mechanical, metallurgical and corrosion tests performed in oil andgas industry.
• Shall demonstrate capability in preparation of welding procedure specifications (WPS), selection of welding consumables, ability to undertake weldment failure analysis; welding related problems diagnosis andsolutions; qualification of welding procedures.
• Shall have experience of working to and fully conversant with international CODES (ANSI/ASME, ASTM, API. BS, EN, MSS. ISO etc.) used in oil and gas industry, and preferably with QatarEnergy Technical Standards.

Brunel International S.E.A Pte. Ltd

UEN No: 199603098R

EA License No: 16S8067

Shinu Alexander: R1657042