Introduction

  • The purpose of the Job is to guarantee the proper preparation and execution of one MIE Project.

    As such, the job holder is accountable:

    • To ensure the proper preparation and execution of the Maintenance and Inspection Engineering (MIE) Project up to handover of MIEC deliverables to department.
    • To ensure follow-up of Maintenance Engineering activities in line with Maintenance & Inspection Engineering Contract (MIEC).
    • To ensure compliance of MIEC activities with the COMPANY specifications/standards and local legislation.
    • To guarantee that all the Maintainable and Inspectable equipment covered by the MIE Project are properly addressed.
    • For following-up the selection, supply chain and inspection of all Project operating spare parts and specific tools,
    • To ensure all the Project templates are uploaded for the platforms First Oil.
    • To guarantee that all the relevant spare parts are available in the warehouse for the platforms First Oil.
    • To co-ordinate Project MIEC activities in collaboration with MIE Contractor, the COMPANY Maintenance.
    • Department and Head of Maintenance and Inspection Engineering.
    • To act as interim Head of Maintenance and Inspection Engineering during his vacation and mission periods.
    • To follow-up the COMPANY method team clarifications requests on completed MIE Project.

What are you going to do 

  • HSEQ responsibilities:
    • Ensure compliance with the COMPANY Incident Free culture, Health and Safety and Environment Policy,
    • Support and enforce the project HSEQ management system (charters, objectives, directives, plans, procedures, and specifications etc.),
    • Promote HSEQ awareness of workforce at all levels through proactive attitude - site tour management at CTR yard, HSEQ meetings ensuring risks are identified, actions assigned and managed within Project team and Contractors,
    • Monitor work activities, especially areas where unsafe acts could occur and ensure that risks have been properly identified and assessed prior to work execution (Job Safety Analysis),
    • Ensure that potential failures, weaknesses, and hazards are immediately reported,
  • During Basic Engineering Phases:
    • Responsible for the preparation of Scope of Work (SOW) for the MIEC contract and assist with CFT preparation along with Field Operations Maintenance Engineering Team,
    • Ensure that all Maintenance and Inspection aspects are captured in the EPCIC contract CFT,
    • Review technical bids, prepare clarifications, and facilitate clarification meetings capturing comments of Bidders,
    • Prepare answers to Bidders technical clarifications,
    • Develop evaluation matrix and critique each bidder based on technical content and proposed personnel / organization,
    • Support the cost reduction initiative with providing C&P the requirements to challenge tenders bid, reducing the cost of the Contract,
  • MIEC General Responsibilities:
    • Approve the review of all technical deliverables issued by the MIE Project Contractor,
    • Lead the review of all contractual deliverables issued by the MIE Project Contractor,
    • Manage Project weekly and monthly meetings, following progress, taking decisions, and ensuring actions are closed out without delaying the Project,
    • Validate the Project Work Time Schedule update,
    • Review the progress measurement figures established by MIE contractor,
    • Challenge Project MIE Contractor for late delivery and any potential requirement for change orders,
    • Participate in MIEC workshops with Company Stakeholders to ensure alignment,
    • Manage quarterly REX with MIE Contractor, ensuring any lessons learnt are captured in REX register for implementation into future MIECs,
    • Participate to the Project Quality Review Audits and ensured any outcomes are captured, actioned and closed out,
  • MIEC Technical Responsibilities:
    • Responsible for developing new or updating existing M&I philosophies and strategies +spare parts recommendation strategy,
    • Accountable for Project MIE activities ensuring that schedule meets EPCIC and Company milestones and readiness for start-up with emphasis being on operating and capital spare part selection process and procurement, including inspection, shipment, delivery, and storage/preservation,
    • Accountable for the quality of the technical description for all spare parts.
    • Commissioning/start up, Capital and operational ensuring purchase requisition specification and relevant certification are correct,
    • Ensure the mass loading of PM data into the CMIMS and adequacy of deliverables for spare parts (capital / operational) and consumables as require,
    • Contribute to MIE contract final report and REX at the end of the project,
    • Responsible for Project handover to Field Operations Team for Maintenance and Inspection.
  • Project Responsibilities:
    • Manage Project as directed by Head of Maintenance and Inspection Engineering,
    • Manage project start-up,
    • Provide support as required to commissioning activities,
    • Facilitate efficient communication/information flow with Head of Maintenance and Inspection Engineering, Project team, stakeholders, and the COMPANY Maintenance department,
    • Contribute to the identification of training requirements regarding installed equipment and where required contribute to the arrangement of training with vendors for COMPANY personnel,
    • Contribute to the identification of new specific maintenance contracts to be used by operations for new equipment, write SOW and prepare for Call for Tender (CFT),
    • Ad-hoc activities as required by line manager,
    • All staff must be willing to participate in Crisis Response Training and to assist during Emergency Response Situations if required.

Essential skills and knowledge 

  • Bachelor’s degree or equivalent in engineering.
  • Senior Maintenance or Inspection Engineer with at least 10 years of Oil and Gas experience including Operations experience.
  • Previous experience in the supervision of Maintenance and Inspection projects and or engineering
  • activities are required.
  • Leadership skills and good communication skills,
  • Good analytical skills,
  • Ability to work on projects in a complex and multicultural environment,
  • Experience with CMIMS,
  • Familiar with COMPANY standards, MANASA and relevant codes and standards,
  • Fluent in English (listening, writing, and speaking) and its technical vocabulary,
  • Computer literate,
  • Available for missions as necessitated by project,
  • Medically fit to travel to Offshore Oil & Gas Platforms,
  • H2S OPITO and T-BOSIET training.

What we offer

  • Salary:
    • Day Rate in USD Plus Allowance
  • Work Schedule:
    • 9 Hours / 6 Days
  • Duration:
    • 31-July-2026, renewable
  • Location:
    • Qatar

$name

Application process

First Contact

We carefully review your application and in the coming weeks, you will be notified for an interview session if you are selected. Only shortlisted candidates will be contacted within 7 days.

Scheduling an Interview

After being shortlisted, you will be contacted via email or telephone to arrange for a date on your availability for the qualification interview.

Phone/ Qualification Interview

During the interview, you will be assessed on your level of experience and skills, work history, availability, and the qualifications the company is seeking for the position.

Meeting in Real Life

After successfully making through the phone interview, a face to face interview will be scheduled between the candidate and recruiter. This session can be a more in-depth  interview to review your communication and interpersonal skills.

Application for the Position

Submission of candidates resume for client’s approval and screening.

Are you the perfect match for this vacancy? Apply in 1 minute and let's get in touch!

your-application-process[1]