Introduction

  • Serve as primary interface with Installation Contractor/Diving Sub-Contractor on matters related to saturation diving, air diving and Remotely Operated Vehicle (ROV) safety and scope of work.
  • Manage and monitor the diving contractor, to ensure diving operations are conducted safely and appropriately in compliance with contractual agreement and industry standards.

What are you going to do 

  • Observe, report and direct the diving and ROV contractor in accordance with Company policy and diving and ROV compliance.
  • Main CONPANY's focal point on diving and ROV related matters onboard Contractor's Vessel
  • Monitors contractor diving & ROV performance including review of Contractors diving & ROV personnel certifications and qualifications, ensuring specifications/approved procedures are followed
  • Assists Project Management with planning, procedure review and technical support of matters involving diving and ROV.
  • Conducts diving plant, ROV and equipment verification audits ensuring all relevant certification and audits are in date, and that any closeout actions from audits have been carried out.
  • Acts as the focal point between the operator and the contractor particularly for diving and ROV SIMOPS and diving PTW.
  • Participates in the development of all diving SIMOPs documents to ensure that all parties have a clear understanding of diving activities (SAT/Air/ROV) and their impact on adjacent work activities.
  • Monitors the contractor to ensure compliance with diving legislation (SAT/Air/ROV), IOGP Diving recommended practice and industry best practices, such as IMCA.
  • Endorses Consent to Proceed with Air, Sat & ROV Diving request/approval issued by CTR on installation vessel/DSV
  • Monitors all diving activities such as supervisor/diver communications, diver video monitoring, ROV/Diver SIMOPS, diver/crane operations, bell deployment/recovery, diving suitability to environmental conditions and vessel movement.
  • Responsible for the emergency response and incident reporting for DCIs and treatment protocols.

Essential skills and knowledge

* Saturation diver qualification.* Saturation or Air Diving Supervisor certification.
* In date IMCA CPD (Continuing Professional Development), if an IMCA ADAS or DCBC qualified supervisor.* Attended a Diving Worksite Representative training based on IOGP guidelines.
* Auditing & Assurance DESIGN (Diving Equipment Systems Inspection Guidance Note) for diving and ROV (Remotely Operated Vehicle) systems (Saturation/Air/ROV).* Formal Dynamic Positioning familiarization training aligned to IMCA M117.
* Formal HSE training with an accredited institution (NEBOSH/IOSH* 8 years experience with offshore commercial diving and supervision (Saturation & Air Diving).
* Experience performing Diving System Assurance Audits to the IMCA D 023/024/053/063 guideline standards.* Sound knowledge of international diving standards and regulations:
* IMCA - International Marine Contractors Association* IOGP - International Oil & Gas producers
* ADCI - Association of Diving Contractors International* 5 years experience in diving operations from a dynamic position (DP) vessel.
* Sound knowledge in seamanship, marine/vessel and ROV operations.* 5 years experience in sub-sea installation, repair and decommissioning
* 2 years experience in offshore construction management.

What we offer 

  • Salary:
    • Day Rate in USD (All inclusive)
  • Work Schedule:
    • 12 Hours / Day
    • 28 Days On / 28 Days Off
  • Duration:
    • 36 Months, with possible extension
  • Location:
    • Qatar, Offshore

Are you the perfect match for this vacancy? Apply in 5 minutes and let's get in touch!

your-application-process[1]

Process of your application

Application process & contact

We will now begin examining your application: We will take a close look at your application documents and ask you for additional information if necessary. If your qualifications match our requirements, we will invite you to meet us for the first time.

Project discussion with our customer

If the introductory meeting goes well for you and us, we will arrange a meeting with the customer who has the perfect project for you. This gives you the opportunity to find out more about the customer and the project.

The decision

If you enjoyed the project discussion and the customer is also convinced of your expertise, we will ask you the final and decisive question: Do you want to get started at Brunel?

Introductory conversation with Brunel

In an introductory meeting, we would like to find out more about your interests, ambitions and professional developments. At the same time, we report on working at Brunel and provide information about all career opportunities and prospects.

Welcome to Brunel

Now great times are beginning! With Brunel you have countless opportunities to help shape technological progress. You decide how your career path goes. We support you in every phase of your career. You always have security behind you: Brunel!