Introduction

  • Ensure rules, standards and procedures are followed in the execution of DBN PWM & AB OBS Project. Ensure that the assigned DBN PWM & AB OBS Project tasks are well managed as per the statement of requirement, specifications and contractual requirements.
  • Ensure that the DBN PWM & AB OBS Project is executed in accordance with the organization’s safety regulations, with quality conformance and within schedule.
  • Ensure that EPCIC CONTRACTOR delivers a high-quality detailed engineering dossier for Construction and Installation phases.
  • Ensure thorough and efficient engineering documentation review, comments and follow-up on due time, and provide inputs and follow up of the internal technical reviews (Project Reviews, etc.)
  • Ensure that the projects are executed in accordance with the organization’s safety regulations, with quality conformance and within schedule and budget.
  • Interact efficiently with the E&C division and other entities.
  • Ensure that all the interfaces with the Offshore SUB-CONTRACTOR Commissioning team are correctly managed.
  • Liaise and ensure the interfaces with E&C Commissioning team.
  • Responsible for commissioning consistency between all the project packages.

What are you going to do 

  • Assure and promote the application of HSE and Safety Engineering rules and specifications.
  • Ensure that the EPCIC CONTRACTOR and SUB-CONTRACTOR comply at all times with safety rules and proactively taking actions as required to ensure compliance.
  • Promote safety culture amongst DBN PWM PMT personnel, CONTRACTOR / SUB-CONTRACTOR and proactively report observations.
  • Ensure / monitor the safety of personnel and installations as well as protection of the environment in all Commissioning department activities.
  • Lead the DBN PWM Commissioning activities as follows:

    Preparation Phase:

  • Coordinate and lead with the SUB-CONTRACTOR Commissioning team all the DBN PWM & AB OBS Pre-Commissioning and Commissioning activities.
  • Provide assistance to the CONTRACTOR Pre-Commissioning team (with the support of E&C Commissioning team) and SUB-CONTRACTOR Commissioning team during the EPCIC engineering and preparation of the commissioning dossiers including a review of planning and organizational requirements, in order to optimize the schedule and keeping offshore commissioning activities streamlined.
  • Review, comment on and approve the preparation of DBN PWM & AB OBS deliverables developed

    ·by SUB-CONTRACTOR such as Commissioning procedures, reporting tools, including ICAPS database, Pre-Commissioning status index and the Commissioning technical database, the handover dossiers / certification, punch list control, planning and deliverables, ensuring accurate reporting and timely corrective action follow-up by the SUB-CONTRACTOR Commissioning team.

  • Plan and supervise the preparation of the Pre-commissioning and Commissioning documentation for DBN PWM & AB OBS Project in accordance with NOC rules and procedures.
  • Verify that everything necessary to carry out the Commissioning activities (logistics, manpower, FATs, VENDOR(S), assistance, materials, test fluids & gases, spare parts, temporary supplies, first fills, consumables, tools and test equipment) has been coordinated, planned and mobilized by the SUBCONTRACTOR.
  • Ensure the SUB-CONTRACTOR ICAPS database is prepared (Pre-commissioning and Commissioning) for each discipline.
  • Ensure the follow-up of internal interfaces and coherence between Commissioning disciplines (instrumentation, electrical, mechanical, piping, process and ICSS).
  • Review and validate CONTRACTOR and SUB-CONTRACTOR testing procedures.
  • To review and approve the Commissioning Management procedures (handover, interfaces, punch list, organization, spare parts etc.).
  • To review and approve the Commissioning dossiers prepared by SUB-CONTRACTOR (including ICAPS database, Operational Test Procedures).
  • To coordinate the activities of the COMPANY Disciplines Commissioning Team mobilized.
  • To participate or ensure Commissioning participation to FAT of major/critical equipment as required.
  • To review the overall Commissioning plan developed by SUB-CONTRACTOR.
  • Ensure the various commissioning preparation tasks are prepared by SUB-CONTRACTOR: work allocation, priorities, schedules, resources (personnel, tools, spare parts, consumables, marine spread) and coordination of the preparation team.
  • Ensure that the Commissioning activities are prepared according to start-up priorities.
  • Ensure that Pre-commissioning preparation is consistent with commissioning priorities and system breakdown.
  • Check that Pre-commissioning and Commissioning activities are correctly taken into account in Project schedule.
  • Good interactions with DBN PWM & AB OBS Construction team, IOP and FOPS at both onshore and offshore.
  • Ensure the required JSA’s are prepared related to Commissioning activities.
  • Ensure the proper succession of pre-commissioning and commissioning sequences with construction, schedule and operations.
  • Ensure that personnel can use ICAPS.

    Execution Phase:

  • To promote/ensure safety within the Commissioning activities and verify that safety procedures and Permit to Work system are implemented by the SUB-CONTRACTOR Commissioning Team.
  • Ensure that the Pre-commissioning planning schedule is implemented in line with commissioning planning and priorities.
  • Ensure Commissioning team review and approve acceptance of the SUB-CONTRACTOR’s system / sub-system RFC & AOC dossiers on behalf of NOC.
  • Ensure SUB-CONTRACTOR ICAPS Administrator generates progress reports and punch list items for each Pre-commissioning and Commissioning task.
  • To witness and monitor the Pre-commissioning activities performed by the CONTRACTOR and countersign all Pre-commissioning dossiers at Ready for Commissioning (RFC) status.
  • To control all Commissioning activities performed by SUB-CONTRACTOR.
  • To ensure proper control of Commissioning activities (progress vs planning, punch list follow-up, etc..) and recommend any necessary corrective actions.
  • To report immediately any unexpected event that may impact the Commissioning or Start-Up of the platforms.
  • To check progress planning and recommend any necessary corrective actions, with close follow-up on punch list.
  • To review and approve the Commissioning dossiers after completion of Commissioning activities and sign the AOC and transfer certificates.
  • Onshore support as required to Offshore Commissioning team as to ensure commissioning activities and schedule are optimized.
  • Ensure correct reporting of Commissioning activities in the time frame.
  • Ensure the effective handover between DBN PWM & AB OBS and FOPS at the AOC stage.

Essential skills and knowledge

  • Minimum Qualification: Bachelor’s degree in Chemical or any other engineering discipline from a recognized university.
  • Minimum of 12 years’ experience of relevant upstream oil and gas industry experience, with wide experience on Field in Process, Instrumentation, etc.
  • Proven experience in managing engineering CONTRACTOR(S) and ability to manage the work of multiple Commissioning teams simultaneously.
  • Previous experience in the offshore O&G sector would be a benefit. Knowledge and experience of OPERCOM Methodology and using ICAPS software.
  • Good sense of team spirit leadership with strong interpersonal & communication skills.
  • Fluent in English both spoken and written.
  • Medical fit to work for offshore work execution.

What we offer 

  • Salary:
    • Day Rate in USD Plus Allowance
  • Work Schedule:
    • 9 Hours / 6 Days
  • Duration:
    • 30-Jun-2025with possible extension
  • Location:
    • Qatar

Are you the perfect match for this vacancy? Apply in 5 minutes and let's get in touch!

your-application-process[1]

Process of your application

Application process & contact

We will now begin examining your application: We will take a close look at your application documents and ask you for additional information if necessary. If your qualifications match our requirements, we will invite you to meet us for the first time.

Project discussion with our customer

If the introductory meeting goes well for you and us, we will arrange a meeting with the customer who has the perfect project for you. This gives you the opportunity to find out more about the customer and the project.

The decision

If you enjoyed the project discussion and the customer is also convinced of your expertise, we will ask you the final and decisive question: Do you want to get started at Brunel?

Introductory conversation with Brunel

In an introductory meeting, we would like to find out more about your interests, ambitions and professional developments. At the same time, we report on working at Brunel and provide information about all career opportunities and prospects.

Welcome to Brunel

Now great times are beginning! With Brunel you have countless opportunities to help shape technological progress. You decide how your career path goes. We support you in every phase of your career. You always have security behind you: Brunel!