Introduction

  • During the onshore phase on site/yard, the C/I Supervisor will assist the Field Operations Lead for:
    • The review of the Operational documents.
    • Comparing 3D modelling with actual construction on site.
    • Supporting equipment FATs/SATs as required.
    • The review of OTP documents.
    • Raise punches during daily work on any anomalies, deviations from model, accessibility, and operability issues.
    • The execution of the OTPs.
    • The supervision and oversight of commissioning execution (loop test, function test…).
    • The preparation of the start-up procedures and the operation.
    • Supporting/supervising ATEX Inspection/examination activities for Instrumentation and Control equipment.
  • Offshore, in close collaboration with the Operating Authority on site (OTL) and the Commissioning Site Leader (CSL) he will:
    • Assist the production team during commissioning activities.
    • Ensure good preparation of the start-up procedures leading to the first oil.
    • Ensure that the Field Operation core crew is well aware of the procedures applicable for the new installation and the start-up sequence.
    • Ensure a role of Discipline advisor with the Major Project team to ensure the proper preparation of the start-up.
    • Review ALL punch close out (including construction), and approves all FOPS discipline related punches.

What are you going to do 

  • Contributes to the Incident Free initiative on site by reporting any anomaly, defect, bad practice, lack of equipment or lack of competence.
  • Contribute to HAZID, HAZOP, 3D Model reviews and Risk assessments as required throughout construction, commissioning and start-up phases.
  • Monitoring that ALL construction is as per 3D model and/or per previously raised punches in the yard.
  • Provide oversight and supervisions to ensure EPCI Contractor carries out installation works to standards acceptable to and compliant with NOC standards.
  • Witness the Operational Test perform by the commissioning and liaise with the Field Operation team.
  • Identifies in conjunction with the FOPS Lead (site)/Operating Authority (OTL) offshore the procedures & precautions to be taken to assure installation, commissioning and start-up activities are carried out safely and efficiently.
  • Finalize on-site start-up procedures sharing them with the Field Operation core crew to make them applicable on site.
  • Finalize a detail start-up sequence in close collaboration with the core Field Operation crew on site.
  • Participate and assist in the preparation of the kick off meeting for start-up activities.
  • Participate to the preparation of the risk assessment of the activities to be performed during the start-up.
  • Prepare the request and order for required start-up tools. Ensure proper storage and identification of the start-up tools.
  • Prepare arrival on site (PTW, KOM, JSA…) of the vendor involved in the start-up of the facility.
  • Check any type B and C punch list and investigate on it if requested by the Field Operations lead, the OTL or the OIM.
  • Ensure the list of inhibits, overrides and isolations with the associated certificates and risk assessment are implemented according to standards, and properly signed and validated by the relevant persons.
  • Be aware of the potential Downgraded situation on site and update the core crew on any update associated with the start-up activity.
  • Participates to HAZID, JSA and Pre-Startup Safety Reviews of new facilities.
  • Prepare, update and check on site the “Red line mark-up” P&ID at the end of the construction and during commissioning phase. Ensure a set of P&ID up to date is always available for field operation team.
  • Ensures together with the OTL that Preventive Maintenance works of SECE are conducted in line with SimOps requirements in the SimOps area.
  • Reviews and follow-up the implementation of corrective actions following shutdown during start-up, communicate with vendor.
  • Make available key documents from project regarding new facilities to field operation team.
  • Ensure all operators on site understand the new safety system and process upgrades brought by the project.
  • Assists the teams for procedures for isolations/de-isolation.
  • Suggests improvements and requests modifications if Operating Procedures are not satisfactory.
  • Daily work planning with CSL and PreComm lead to make sure all pre-comm/comm are monitored by FOPS.
  • Keep OTL updated daily on the tasks ongoing on greenfield.
  • Liaising daily with OTL on site to involve Base Ops team from beginning of comm phase (offshore).
  • Agree with CSL on punch categories (A/B/C) on daily basis and escalate to FOPS Lead if needed.
  • Supporting Base Ops for familiarization and operation on the new facility.
  • Assuring readiness for start-up of all sub-systems, plant and finally for First Oil.

Essential skills and knowledge

  • Education: higher national diploma or certificate (equivalent to A-levels + 2 years’ study).
  • Industry experience: minimum 10 years’ experience in Control & Instrumentation in offshore operations.
  • Basic firefighting.
  • T-BOSIET, H2S training OPITO approved.
  • NOC PTW training & JSA awareness.
  • COMPEX certification.
  • Confined Space Entry & Rescue, Authorized Gas Tester.
  • Lifting and rigging training, manual handling training.
  • Radiation protection awareness.
  • Hazard & Energy control Logout & Tagout awareness.
  • Ability to work independently while maintaining good relations with colleagues and others.
  • Must have a proven sense of operational responsibility, courage to intervene and challenge.
  • Previous experience with offshore operation, Production, oil & gas.
  • Detailed knowledge of ATEX requirements/regulations.
  • Willing to work flexible shifts and extended shifts as required.
  • Fluent in written and spoken English.
  • Computer literate.

What we offer 

  • Salary:
    • Day Rate in USD
  • Work Schedule:
    • 28 weeks on/ 28 weeks off
  • Duration:
    • 2 years, with possible extension
  • Location:
    • Qatar

Are you the perfect match for this vacancy? Apply in 5 minutes and let's get in touch!

your-application-process[1]

Process of your application

Application process & contact

We will now begin examining your application: We will take a close look at your application documents and ask you for additional information if necessary. If your qualifications match our requirements, we will invite you to meet us for the first time.

Project discussion with our customer

If the introductory meeting goes well for you and us, we will arrange a meeting with the customer who has the perfect project for you. This gives you the opportunity to find out more about the customer and the project.

The decision

If you enjoyed the project discussion and the customer is also convinced of your expertise, we will ask you the final and decisive question: Do you want to get started at Brunel?

Introductory conversation with Brunel

In an introductory meeting, we would like to find out more about your interests, ambitions and professional developments. At the same time, we report on working at Brunel and provide information about all career opportunities and prospects.

Welcome to Brunel

Now great times are beginning! With Brunel you have countless opportunities to help shape technological progress. You decide how your career path goes. We support you in every phase of your career. You always have security behind you: Brunel!