PRO Integration Engineer

Qatar - Oil, Gas & Mining - Oil & Gas - Engineering & Design - Academic Master

Are you driven, independent and enthusiastic PRO Integration Engineer
interested in joining the team of our client, an LNG operating company in Qatar.

Feel free to contact

Iswarya Badri, Account manager

Apply now

About this role

Key Job Accountabilities

  • The job holder is accountable for demonstrating an exemplary behavior with regard to HSE rules & requirements and for implementing HSE rules within his area of responsibility;
  • The job holder is accountable for the following activities during AB-PRO project execution;
  • Ensuring early-tie ins and integration works definition to the required level during FEED;
  • Ensure close coordination and interfacing with other COMPANY entities during FEED and EPCIC stage to identify any clashes/conflicts;
  • Prepare all EPCIC execution phases in particular offshore works with regards to;
  • Defining scope, procedures, work statements for Integration Works;
  • Coordinate with EPCIC and COMPANY (MP FOPS, E&C) entities regarding SIMOPS readiness;
  • Minimize Shut Down work and optimize offshore Integrations Works duration;
  • Supervise and follow-up EPCIC contractors on Integration Works throughout all phases;
  • Report and liaise with AB-PRO Topside Package Lead and Integration Manager as needed;


  • To promote & comply with applicable safety instructions and other COMPANY HSE procedures in all Integration activities;
  • To carry out work in compliance with COMPANY values and policies, relevant laws and regulations, agreed COMPANY priorities and objectives, COMPANY standards and procedures and good industry practices;
  • To treat all information obtained during course of the work with confidentiality;
  • To ensure consistence and correct interfacing with other areas during the various phase of EPCIC detailed design, procurement, fabrication, installation and dedicated transverse coordination between packages as required to ensure all requirements for Integration activities are complied with (especially with E&C and MP FOPS);
  • To ensure timely review of documentation by COMPANY interfaces (E&C, MP FOPS) to identify clashes/conflicts with other COMPANY projects throughout project execution;
  • To interface with Field Operations team members in developing SIMOPS and shutdown scope, philosophy and schedule for the site activities with regards to new PRO Integration Works;
  • To interface with E&C, C&P and EPCIC’s for definition and execution of early tie-inns and integrations works;
  • To anticipate the offshore activities and ensure Contractor starts in due time preparation of the critical offshore activities;
  • In case of drift in schedule, liaise with other team involved (engineering, construction, commissioning) to study remedial actions
  • Promote a “no change policy” to meet budget and schedule constraint without impairing quality and safety of the Integration Works activities;
  • To manage assistance from shareholder specialists (remote head office), when required during all phases;
  • To assist Project Management to compile dossier and make presentation to obtain all necessary internal (validation committees TIF, TAC, CPC, CPAC) and external (Shareholders) approvals for Project contract awards;
  • To ensure timely finalization of Integration Works contractual documents and contract awards for EPCIC;
  • To manage Detail Engineering Integration Works progress including follow-up of engineering and vendor documentation reviews to ensure compliance with design dossier, SOR, Company specifications, Corporate standard and HSE regulation, international codes and classification society rules;
  • To promote value engineering with FEED Engineer in the facility design with objective to reduce Project capital expenditures;
  • To ensure, in collaboration with Engineering Manager that Integration Works engineering deliverables produced by EPCIC contractor is properly assigned to and reviewed by appropriately qualified Project personnel within the specified time period;
  • To assist EPCIC contract management with regards to all technical, commercial and contractual issues arising during Integration Works execution and liaise with Integration Manager on regular basis;
  • To encourage identification of any optimization / improvement in the design dossier to be implemented in the early stage of concept design,
  • To ensure that EPCIC queries are reviewed and responded to in a timely manner;
  • To ensure implementation of the design change process affecting Integration Works activities;
  • To manage potential deviations from the COMPANY referential with the Engineering Manager for final decision on whether or not to implement;
  • To attend HAZID/ HAZOP/ Project Technical reviews sessions with COMPANY, Contractors and vendors teams;
  • To ensure engineering support to construction and commissioning teams as required;
  • To promote alternatives solutions to reduce and to optimise the duration for offshore installation;
  • To ensure close coordination within team on all engineering, constructability and operational matters;
  • To ensure that relevant feedback from previous similar projects are considered project works performance;
  • To setup and manage weekly and monthly meetings with Contractor(s), and call specific ad hoc meetings as required;
  • To ensure Company participation in equipment FAT, SAT and other inspections at site/vendor premises as required;
  • To participate on follow up on the Project progress and risk reporting;
  • To carry out any other duty or task that may be assigned by hierarchical superiors.

About you


  • Qualification: Bachelor’s degree or equivalent in engineering;
  • Experience: At least 15 years’ experience in the offshore oil & gas project with minimum 10 years experience as Construction/Piping/Project Engineer;
  • Experience of similar project during construction phase at yard will be a plus;
  • Experience within a project team: At least 5 years’ experience within large multinational taskforce team environment;
  • Track records of offshore brownfield projects;
  • Experience in offshore facilities at conceptual and pre-FEED stage is a plus;
  • Available for technical missions worldwide;
  • Familiar with Company General Specifications, Prodom, and other relevant international codes and standards;
  • Language: Fluent English;
  • Computer literate;
  • Good leadership skills and good communication skills;
  • Ability to work on projects in a complex and multicultural environment;
  • Good analytical skills;
  • H2S OPITO and T-BOSIET trainings.

What we offer

Contract Duration: Contract Hire with possible extention;

Tentative Start Date: ASAP;

Work Location: Qatar;

Deadline for CV Submission: 8 April 2019.

About us

Our client is
an LNG operating company in Qatar. Build your career as a PRO Integration Engineer as
you participate in some of the most challenging tasks.


  • Vacancy number: PUB207803
  • Location: Qatar
  • Market: Oil, Gas & Mining
  • hours per week: 50
  • Branche: Oil & Gas
  • Education level: Academic Master
  • Area of Expertise: Engineering & Design
  • Closing date: Friday, May 31, 2019
Apply now

Feel free to contact


Iswarya Badri

Account manager Brunel Energy Qatar Doha

+974 4040 3434

Related vacancies

    Job Alert

    Send me an email with the latest vacancies matching PRO Integration Engineer - Qatar

    Search query is invalid or corrupted You are already subscribed to this Job Alert (duplicate)
    Frequency is not correctly filled in
    Please enter a valid email address
    When creating a Job Alert you agree to our Privacy Statement. You can adjust or cancel your Job Alert at any time.

    Confirmation sent to